Custom data centres - ITP
Filtered by model:
itp
remove filter
Products in total: 10
-
R10160
ITP840P/40, Data group centres
IT 0,24m2
Surface
ITP840P/40, Data group centres
IT 0,24m2
In the ITP data group centres, the IT and electricity distribution spaces are located on top of each other. The side of the centre has a cable chute by the IT space for the wiring of the electricity distribution section. This makes it easy to connect a feed cable from the bottom. The IT space can be equipped with a wide variety of fittings, which enable several different uses. Available for both surface and flush mounting. The surface-mounted model contains the necessary feed-through flanges and a fixed back plate. When flush-mounted, the centre only rises 4mm above the wall surface!
- Ue (V)
- 230/400
- IP
- 20
- fn
- Icw
- <5 kA
- Material
- Ku-Si
- RJ -connector
- Installation
- Surface
- Väri
- RAL9010
-
R10161
ITP840U/40, Data group centres
IT 0,24m2
ITP840U/40, Data group centres
IT 0,24m2
In the ITP data group centres, the IT and electricity distribution spaces are located on top of each other. The side of the centre has a cable chute by the IT space for the wiring of the electricity distribution section. This makes it easy to connect a feed cable from the bottom. The IT space can be equipped with a wide variety of fittings, which enable several different uses. Available for both surface and flush mounting. The surface-mounted model contains the necessary feed-through flanges and a fixed back plate. When flush-mounted, the centre only rises 4mm above the wall surface!
- Ue (V)
- 230/400
- IP
- 20
- fn
- Icw
- <5 kA
- Material
- Ku-Si
- 481 x 817
- RJ -connector
- Installation
- Väri
- RAL9010
-
R10164
ITP1120P/80, Data group centres
IT 0,24m2
Surface
ITP1120P/80, Data group centres
IT 0,24m2
In the ITP data group centres, the IT and electricity distribution spaces are located on top of each other. The side of the centre has a cable chute by the IT space for the wiring of the electricity distribution section. This makes it easy to connect a feed cable from the bottom. The IT space can be equipped with a wide variety of fittings, which enable several different uses. Available for both surface and flush mounting. The surface-mounted model contains the necessary feed-through flanges and a fixed back plate. When flush-mounted, the centre only rises 4mm above the wall surface!
- Ue (V)
- 230/400
- IP
- 20
- fn
- Icw
- <5 kA
- Material
- Ku-Si
- RJ -connector
- Installation
- Surface
- Väri
- RAL9010
-
R10165
ITP1120U/80, Data group centres
IT 0,24m2
ITP1120U/80, Data group centres
IT 0,24m2
In the ITP data group centres, the IT and electricity distribution spaces are located on top of each other. The side of the centre has a cable chute by the IT space for the wiring of the electricity distribution section. This makes it easy to connect a feed cable from the bottom. The IT space can be equipped with a wide variety of fittings, which enable several different uses. Available for both surface and flush mounting. The surface-mounted model contains the necessary feed-through flanges and a fixed back plate. When flush-mounted, the centre only rises 4mm above the wall surface!
- Ue (V)
- 230/400
- IP
- 20
- fn
- Icw
- <5 kA
- Material
- Ku-Si
- 481 x 1096
- RJ -connector
- Installation
- Väri
- RAL9010
-
R10228
ITP840U/42/0,24, Ryhmäkeskus-data uppo FE
70mm matalaan seinärakenteeseen
ITP840U/42/0,24, Ryhmäkeskus-data uppo FE
70mm matalaan seinärakenteeseen
- Ue (V)
- 230/400
- IP
- 20
- fn
- Icw
- <5 kA
- Material
- Ku-Si
- 481 x 817
- RJ -connector
- Installation
- Väri
- RAL9010
-
R10230
ITP1120U/84/0,24, Ryhmäkeskus-data uppo FE
70mm matalaan seinärakenteeseen
ITP1120U/84/0,24, Ryhmäkeskus-data uppo FE
70mm matalaan seinärakenteeseen
- Ue (V)
- 230/400
- IP
- 20
- fn
- Icw
- <5 kA
- Material
- Ku-Si
- 481 x 1096
- RJ -connector
- Installation
- Väri
- RAL9010
-
R10267
ITP980U/60, Data group centres
IT 0,24m2
Uppo/Pinta
ITP980U/60, Data group centres
IT 0,24m2
In the ITP data group centres, the IT and electricity distribution spaces are located on top of each other. The side of the centre has a cable chute by the IT space for the wiring of the electricity distribution section. This makes it easy to connect a feed cable from the bottom. The IT space can be equipped with a wide variety of fittings, which enable several different uses. Available for both surface and flush mounting. The surface-mounted model contains the necessary feed-through flanges and a fixed back plate. When flush-mounted, the centre only rises 4mm above the wall surface!
- Ue (V)
- 230/400
- IP
- 20C
- fn
- Icw
- <5kA
- Material
- Ku-Si
- Breaker 1-pole C20
- -
- RJ -connector
- Installation
- Uppo/Pinta
- Väri
- RAL9016
-
R10268
ITP980U/60, Data group centres
IT 0,24m2
Uppo tai pinta
ITP980U/60, Data group centres
IT 0,24m2
In the ITP data group centres, the IT and electricity distribution spaces are located on top of each other. The side of the centre has a cable chute by the IT space for the wiring of the electricity distribution section. This makes it easy to connect a feed cable from the bottom. The IT space can be equipped with a wide variety of fittings, which enable several different uses. Available for both surface and flush mounting. The surface-mounted model contains the necessary feed-through flanges and a fixed back plate. When flush-mounted, the centre only rises 4mm above the wall surface!
- Ue (V)
- 230/400
- IP
- 20C
- fn
- Icw
- <5kA
- Material
- Ku-Si
- Breaker 1-pole C20
- -
- RJ -connector
- Installation
- Uppo tai pinta
- Väri
- RAL9016
-
R10291
ITP980U/60, Data group centres
IT 0,24m2
Uppo/Pinta
ITP980U/60, Data group centres
IT 0,24m2
In the ITP data group centres, the IT and electricity distribution spaces are located on top of each other. The side of the centre has a cable chute by the IT space for the wiring of the electricity distribution section. This makes it easy to connect a feed cable from the bottom. The IT space can be equipped with a wide variety of fittings, which enable several different uses. Available for both surface and flush mounting. The surface-mounted model contains the necessary feed-through flanges and a fixed back plate. When flush-mounted, the centre only rises 4mm above the wall surface!
- Ue (V)
- 230/400
- IP
- 20C
- fn
- Icw
- <5kA
- Material
- Ku-Si
- Breaker 1-pole C20
- -
- RJ -connector
- Installation
- Uppo/Pinta
- Väri
- RAL9016
-
R10320
ITP980U/60, Data group centres
IT 0,24m2
Uppo/Pinta
ITP980U/60, Data group centres
IT 0,24m2
In the ITP data group centres, the IT and electricity distribution spaces are located on top of each other. The side of the centre has a cable chute by the IT space for the wiring of the electricity distribution section. This makes it easy to connect a feed cable from the bottom. The IT space can be equipped with a wide variety of fittings, which enable several different uses. Available for both surface and flush mounting. The surface-mounted model contains the necessary feed-through flanges and a fixed back plate. When flush-mounted, the centre only rises 4mm above the wall surface!
- Ue (V)
- 230/400
- IP
- 20C
- fn
- Icw
- <5kA
- Material
- Ku-Si
- Breaker 1-pole C20
- -
- RJ -connector
- Installation
- Uppo/Pinta
- Väri
- RAL9016
